How to Make a Origami Lizard Head

Download Article

Download Article

The ancient Japanese art of paper folding, known as origami, has become a popular craft all over the world for kids and adults alike. While some of the shapes can be very difficult and intricate, there are also plenty of easier options for beginners. If you want to try your hand at creating impressive origami animals, fold a cat, frog, or fox. All you need is a piece of square paper to get started!

  1. 1

    Fold a square piece of paper in half along the diagonal. Lay the paper so that it's in a diamond shape. Bring the bottom onto the top corner and run your finger along the fold to crease it.[1]

    • You can use any size, color, and type of paper, as long as it's a perfect square.
    • If you're using paper that has a pattern on one side, start with the pattern facing down.

    To cut a sheet of 8.5 by 11 in (22 by 28 cm) paper into a square, fold the upper left corner of the paper down so that the edge lines up with the edge of the right side. Crease it. Cut off the rectangle at the bottom of the paper, along the edge of the folded triangle. Voila! You have a piece of square paper.

  2. 2

    Fold the paper in half again, then unfold only this 2nd fold. Pull the left corner onto the right corner, creasing the fold down the middle. Then open it back up to the previous triangle shape.[2]

    • Don't unfold the paper all the way back to a square.

    Advertisement

  3. 3

    Fold the left and right corners up at a 45 degree angle from the center. These folds will create the ears of the cat. Pull the tips up so they're at least even with the top corner.[3]

    • Try to keep the ear folds the same on both sides. Make the head as symmetrical as possible.
  4. 4

    Pull the top corner down, folding it to flatten the top of the head. The bigger the piece that you fold down, the smaller your cat's head will be. A good rule of thumb is to bring the top corner down about 1/3 of the way. Crease it so that the point stays down.[4]

    • The amount that you fold over at the top also affects the size of the ears. If you fold over a larger section, the ears will be more exposed and appear bigger.
  5. 5

    Flip the paper over and add any finishing touches you'd like. This side is the front of the cat's face. If you want to round out the face, fold the corners on the side under slightly. Similarly, if you want to flatten the cat's chin instead of having it come to a point, fold the bottom corner back to create a straight line.[5]

    • You can also draw eyes, whiskers, and a nose on the cat's face with a marker or paint.
    • For a 3D craft, glue googly eyes on the front and use pipe cleaners as whiskers.

    Advertisement

  1. 1

    Fold a square piece of paper on both diagonals, unfolding it in between. Bring 2 opposite corners together, creasing the diagonal fold. Then open the paper back up and repeat with the other 2 corners.[6]

    • Your paper must be square with all of the edges the exact same length.
    • Any size, color, or type of square paper will work.

    Origami FAQs

    Do I have to use origami paper?
    No! You can use any type of paper you'd like, as long as it's a square sheet.

    What paper is best for beginners?
    Origami paper is ideal because it's thinner and easier to fold.

    Where can I find additional help for folding origami?
    There are plenty of free video tutorials that you can watch online and follow along with.

  2. 2

    Fold the paper in half, then unfold it again. Place the left edge of the paper onto the right edge. Make a crease by pressing firmly along the fold and then open the paper back up to a square.[7]

    • If you need help creating a fold that isn't crooked, use a straight edge like a ruler or the edge of a counter to fold along.
  3. 3

    Bring the 2 sides of the crease together so the paper folds into a triangle. Take the left side and pull it in to meet the right side. As you do this, the paper should collapse into a triangle shape along the diagonal folds you created earlier.[8]

    • If your paper doesn't collapse easily or correctly, try re-folding the diagonals and the center fold. The more you crease those lines, the easier the paper should fold onto itself.
  4. 4

    Fold the top layer of both corners into the center. This will create a square shape in the middle of the triangle. Line up the edges of the corners so that they're perfectly perpendicular to the bottom of the triangle, straight down the middle.[9]

    • Avoid overlapping the edges of the folded corners. They should just touch each other.
  5. 5

    Take the corners of the small square and fold them into the center. This is a similar fold to what you just did, and it will turn the tiny square into a kite shape. The edges of the folds should line up in the center.[10]

    • Crease the folds firmly so they stay in place.
  6. 6

    Flip the paper over and fold the 2 corners into the center. The left and right corner will meet at the bottom of the frog, creating a point. Align the long edges in the center so they're touching, but not overlapping. They should form a line down the middle.[11]

    • Avoid leaving a gap between the 2 edges. If they aren't slightly touching, start the fold over.
  7. 7

    Fold the 2 bottom corners slightly outward to create the legs. The long edge that was in the center should now line up with the outer edge of the folded triangle. Run your finger firmly along the fold to hold it in place.[12]

    • It helps to hold the frog in place at the top tip while you make this fold.
  8. 8

    Fold about 1/3 of the bottom of the frog up towards the top. You're beginning the folds that will let your frog jump. Bring the legs and bottom of the body up, creasing it securely.[13]

    • Don't fold the shape completely in half or it won't look like a frog.
  9. 9

    Fold the bottom of the frog back onto itself, flipping the legs down. Make another fold near the bottom, this time folding the paper away from you. This is similar to making a pleat. The legs will untuck and point down, away from the head.[14]

    • Add googly eyes to the top of the frog or glue on red paper tongues if you'd like.

    How to Make Your Frog Jump

    Set the frog with its legs down on a flat surface. Press down on the back body (where you made the pleated folds), then release quickly to let it spring up.

    Advertisement

  1. 1

    Fold a square piece of paper in half diagonally. Bring 2 opposite corners together and crease the fold. This will form a triangle shape.[15]

    • You can use any type, color, or size of square paper.
    • Origami paper is best for beginners because it is easiest to fold.
  2. 2

    Bring the 2 bottom corners of the triangle up to the top corner. Your paper will now be in a smaller square. Line up the edges in the center as you fold the corners.[16]

    • Make sure the edges are just slightly touching. You don't want them to overlap, but you also don't want there to be a gap between them.
  3. 3

    Fold the 2 sides of the square backwards along the diagonal. Bring the 2 corners on either side of the open fold together behind the square. You'll now have a triangle shape again, with 2 flaps.[17]

    • If it's easier, you can flip the paper over to make the fold.
  4. 4

    Fold the side with open edges 1/3 of the way towards the other corner. This side will be one of the sides formed by the right angle of the triangle. Line up the bottom of the fold with the edge on the bottom of the triangle. Crease it firmly to hold it in place.[18]

    • The bigger the section that you fold over, the bigger the fox's head will be.
  5. 5

    Pull open the corner of the flap on the piece you just folded. There should be 2 layers on your folded-over section. Take the bottom corner of just the top layer and pull it back in the opposite direction of the fold.[19]

    • Be gentle when pulling the corner to avoid ripping the flap.
  6. 6

    Fold the tip in the center down to create the head. As you pull open the flap, there will be a small triangular piece in the middle that automatically begins folding down. Run your finger along the fold to crease it so it doesn't pop back up.[20]

    • If you want to decorate your fox, add a face with markers, paint, or googly eyes.

    Advertisement

Add New Question

  • Question

    Can I make a square out of any piece of paper?

    Elizabeth Bolster

    Elizabeth Bolster

    Community Answer

    Yes, you can make a square out of any piece of paper. For origami, it is best you use origami paper or printer paper.

  • Question

    Why doesn't my chick stand up?

    Community Answer

    It could be unbalanced if you folded it unevenly, but you could try flattening the feet and that might make it stand better.

  • Question

    Can I do an origami doll?

    T. Chinsen

    Figures such as dolls or people can vary in complexity. Any origami organization will have numerous designs from which to choose. You will have to look to see at what level you are comfortable.

  • Question

    Can you use card if you have to?

    Katniss73

    Katniss73

    Community Answer

    Card can be used for origami, but it is much more difficult to fold, especially if the model is complicated.

  • Question

    I'm a beginner with origami. How can I make animals easier?

    Butterfly

    Butterfly

    Community Answer

    Take it slowly, and practice. Learning to do origami takes time, so rushing won't help. Keep trying again and again slowly, and you'll succeed. When you are unable to make the desired figure, look over where you went wrong before making another one. This will make it easier for you to do origami if you're a beginner.

  • Question

    Is making an origami wolf hard?

    Butterfly

    Butterfly

    Community Answer

    No, it's easy. As long as you understand the steps properly, know what exactly you need to do and have some practice at making origami already, then it's really easy. If you're a beginner, you may find it a little hard at first, though. But don't worry, because as you practice, it'll become a lot easier.

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertisement

  • Origami paper is best for beginners because it's thinner and easier to fold.

  • Always use paper that's perfectly square. If all of the sides aren't the exact same length, the origami animal won't turn out right.

  • Crease folds by running your finger or palm firmly along the fold.

  • Line up edges or corners when you're folding your paper in half to make sure the fold falls directly in the center.

Thanks for submitting a tip for review!

Advertisement

About This Article

Article SummaryX

To make an origami cat, start by folding a square piece of paper in half diagonally. Then, fold the paper in half again, and unfold the second fold. Next, fold the left and right corners up at a 45-degree angle from the center to make the ears, and fold the top corner down toward the center to flatten the head. Finally, turn your origami cat over, and draw on the finishing touches, like eyes, whiskers, and a nose. To learn how to make an origami frog or fox, scroll down!

Did this summary help you?

Thanks to all authors for creating a page that has been read 40,401 times.

Did this article help you?

How to Make a Origami Lizard Head

Source: https://www.wikihow.com/Make-Origami-Animals

0 Response to "How to Make a Origami Lizard Head"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel